What should we pay attention to when using water meters?

As the saying goes, "No mistake in cutting firewood by sharpening knives." When we use them, we also need to pay attention to this point. So we are using super-standard.

What localities should we pay attention to when using a sound meter?

On this issue, the relevant technical personnel of the intelligent water meter manufacturer summed up the following points for attention:

1. The main reason for abnormal operation is the unreasonable device. When installing the device, it is necessary to select the position of the device steadily. Besides guaranteeing that the pipeline must be filled with liquid when satisfying the upper, lower and flow straight sections and normal operation, the transducer should be kept away from the interference sources such as valves, pumps, high-voltage electricity and frequency converters as far as possible.

2. Timing protection is the basis to ensure the long-term operation of water meters: compared with flow meters, the protection of water meters is relatively small. Check the flange connection between the water meter and the pipeline regularly, and consider the influence of temperature and humidity on its electronic components, so as to ensure the long-term stable operation of the water meter.

3. Timely calibration is the premise to ensure the accurate measurement of water meters: adhere to one set of calibration. That is to verify the water meter of each new device before the device to ensure good location, good device and accurate measurement; when the flow of the water meter running online suddenly changes, use portable flowmeter to check in time, find out the cause of the flow sudden change, and determine whether the fault of the water meter or the change of the flow occurs.